Blog navigation
Mandy from the account @nesth0use imagined a table with double use: a play table for the children and a small decorative side table. She had a tray that suited her, it had to be adapted and brought up to date. With this oval top is a piece of vinyl, this table has a whole new look.
EQUIPMENT
- An oval table top
- Double-sided tape
- vinyl decor
- Cutter
- 4 conical feet 40 cm
- 16 hinge screws of 20 mm
DIY PROCEDURE
STEP 1
Take the double-sided tape and cut out pieces to position them on the front of your oval tray. Put adhesive on the contours and in its center.
STEP 2
Position your vinyl decor over it, taking care to center it in relation to the tray.
STEP 3
Cut your vinyl decor on the back, taking care to respect the shape of the oval tray.
STEP 4
Once the decor and the board are one, cut out the excess using the cutter, following the lines of the board.
STEP 5
Turn the tray over by positioning it on its back and position the 4 conical feet.
When positioning, arrange the equal dimensions of the edge and the sides so that the assembly is symmetrical.
STEP 6
Screw the 4 conical feet 40 cm using the 20mm hinge screws and a screwdriver.
Tips : do not take into account the thickness of the vinyl decor when choosing the screws. It is a very thin element and it may be damaged.
THE RESULT
To discover even more creations to create furniture for our dear darlings, discover these inspirations of furniture for children and teenagers by click here.
Discover our latest DIYs :
Leave a comment