Blog navigation
Our feet are made in Hauts-de-France
Are you desperately looking for a bedside cabinet without finding what you are looking for? We are offering you a DIY bedside table with cabinet. This will allow you to slip in a book and some odds and ends.
If the minimalist style appeals to you, keep reading !
EQUIPMENT
- 2 skate feet 40 cm
- 2 pine boards 30x30 cm
- 2 pine boards 10x30 cm
- Special wood glue
- 8 screws hinges
- Varnish
- Screwdriver
DIY PROCESS
STEP 1 :
Put glue on the edge along the length of the 10x30 board then position it on the end of the board 30 cm by 30 cm.
STEP 2 :
Repeat step 1 with the second plank, putting it parallel to the first.
STEP 3 :
Put glue on the 2 slices of the small boards lengthwise and position the second board of 30 by 30 cm.
STEP 4 :
Apply pressure gently and let the assembly dry.
STEP 5 :
You can varnish the box to protect the wood.
STEP 6 :
Once the box is perfectly dry, position skate feet , point towards the holes in the box, 10 cm apart.
STEP 7 :
Secure the feet using 8 wood screws or hinge screws.
STEP 8 :
Your bedside table is now complete.
TIPS
This piece of furniture can also be used for a sofa end where you can slip your remotes and magazines while putting a nice bouquet on top.
Leave a comment