Blog navigation
Today we suggest that you make a console using 2 feet and attaching the other part to the wall. I am sure that you will find a section of wall either in your entry, your living room, your living room to make your console. You will place your little charms, your favorite plants or simply with a mirror on top.
Let's take a closer look at the necessary equipment.
EQUIPMENT
- 2 reinforced hairpin feet 71 cm
- A board found in a DIY store
- 4 x 20 mm hinge screws
- 2 brackets
- 4 Phillips screws
- A drill
- A marker
- A one-meter ruler
- One meter
- One level
DIY PROCESS
STEP 1 :
Using the tape measure, draw a horizontal line at a height of 71 cm and the length of the board.
STEP 2 :
Mark the location of the brackets 10 cm from the edge of the tray.
STEP 3 :
Screw the plasterboard plugs then fix the brackets to the wall.
STEP 4 :
Check the correct location of the board.
STEP 5 :
Put the board on the ground on its back then position the feet a few centimeters from the edge to prevent the plate from being visible. Then screw the feet on the board using 3 wood screws.
STEP 6 :
Position the console on the wall where it will be fixed.
STEP 7 :
Screw the bracket and the console together with 2 wood screws.
You can use this trick to create a desk corner, a child's desk, a dining table or a high table. Now it's your turn! look our youtube video on this to help you.
Leave a comment