CREATE YOUR OWN VINYL FURNITURE25 June 2020
Got a pretty turntable and vinyl records you love that are tucked away but not showcased? So get started in the manufacture of a piece of furniture that will enhance them.
- 4 pieds épingle 15 cm
- 1 board of 55 x 52.5 cm
- 2 boards of 52.5 x 45 x 2 cm
- 3 boards of 51 x 45 x 2 cm
- 4 brackets
- 12 hinge screws 20 mm
STEP 1 :
Make a line 15.5 cm from the edge on the 55 x 52.5 cm board lengthwise then come and fix 2 brackets.
STEP 2 :
Make a line 15.5 cm from the edge on the 2 boards of 52.5x45 cm lengthwise and fix a square on each.
STEP 3 :
Form the frame by covering the smaller boards (length 51 cm and width 14.5 cm) with the longest boards (length 52.5 cm and width 45 cm) and nail. That is, the longest boards are on the outside and the shorter boards are on the inside of the frame.
STEP 4 :
Put the box on the ground with an empty face in front of you. Arrange the 55x52.5cm board, taking care to put the face with the brackets inside the box.
STEP 5 :
Nail the bottom to the box using screws and a hammer.
STEP 6 :
STEP 7 :
Put the box on these feet, slide the last 51x45cm board by resting on the brackets.
STEP 8 :
Varnish the whole.
This piece of furniture can be used as a storage unit or as a bedside table with smaller dimensions. It's your turn !
To find our foot pin 15 cm : click here
ÉCRIRE UN COMMENTAIRE