CUSTOMIZE A CLASSIC FURNITURE

Let's freshen up this piece of furniture without soul and personality that sits in your home without you even paying attention! Mandy du commpte @nesth0use as textured and given relief to a most classic piece of furniture. Let's discover DIY!

MATERIAL

• IVAR furniture
• Black paint for wood furniture
• Paint roller
• Burlap: 2 panels of 71 cm by 30 cm
• Black paint for jute
• Brush
• Cleat 4 cm x 240 cm x 1,5 cm
• Glue gun
• Screwdriver
• 2 black custom thin flat iron 26 cm high and 30 cm wide
• 10 hinge screws 20 mm

DIY PROCESS

STEP 1 :

Paint your furniture with suitable wood paint and a roller. Let dry time indicate.

STEP 2 :

Turn the furniture over to position it the made-to-measure flat iron feet and screw them on thanks to the 10 20 mm hinge screws and the screwdriver.

STEP 3 :

We will create the dials. To do this, start by cutting the necessary burlap, i.e. 2 panels of 71 cm by 30 cm.

STEP 4 :

Paint the 2 burlap using black burlap paint and a brush.

STEP 5 :

Cut the cleats with diagonal angles, you will need 2 cleats of 4x72 cm and 2 other cleats of 4x30.5 cm.

STEP 6 :

Paint the cleats with the paint suitable for wood, a roller and let dry.

STEP 7 :

Glue the cleats to the burlap using the glue gun. Make sure you keep an angle of 90 ° degrees.

Tips: Put wood filler if necessary, to finish the angles well.

STEP 8 :

Disassemble the cabinet doors to nail the dials on them to ensure you position them in the center.

THE RESULT

Photo credit : @nesth0use

With a few tips, you have just given your furniture a unique style! To furniture we attack we now? A coffee table made from a pallet or nesting coffee tables !

Discover the fine custom flat iron foot used for this DIY in click here.